![/!\](/basewiki/moin_static1910/moniker_cbu/img/alert.png "/!\"){kind=small}
You should trust both wikis because the password could be read by the particular administrators.
Maxfilter Script in Matlab
This script will do the following for you:
- Detect bad MEG channels from the pre-HPI period in your data (assuming HPI measurement was switched on after 20s)
- Apply SSS including ST and movement compensation, downsampling by a factor 3 (to 3 ms, if sampling frequency is 1000 Hz), assuming head origin [0 0 45] for all data sets
- Interpolate each data set to the first one specified in the list, for each subject separately ("trans")
The script automatically detects bad channels from the pre-HPI period, but also allows you to specify further bad MEG channels at the top.
At the end, you will have files ending in "sss" (before trans) and "ssst" (after trans), which you can use for the interesting part of your analysis...
% based on script by Jason Taylor
clear subject blocksin blocksout badchannels;
pathstem = '/YourOutputPath/'; % for output data
rawpathstem = '/megdata/cbu/YourSubDir'; % input data
% Define data for individual subjects as follows:
cnt = 1;
subject{cnt} = {'meg01_0001', '012345'};
blocksin{cnt} = {'block1', 'block2', 'block3', 'block4'}; % as named during recording, in /megdata/cbu/YourSubDir/... (may differ across subjects)
blocksout{cnt} = {'block1', 'block2', 'block3', 'block4'}; % should be consistent for all subjects
badchannels{cnt, 1} = {'0741', '1533'}; badchannels{cnt, 2} = {'1533', '0713'}; badchannels{cnt, 3} = {''}; badchannels{cnt, 4} = {''}; % define bad MEG (not EEG) channels here (if there are any)
cnt=cnt+1;
subject{cnt} = {'meg02_0002', '123456'};
blocksin{cnt} = {'block1', 'block2', 'block3', 'block4'}; % as named during recording, in /megdata/cbu/YourSubDir/... (may differ across subjects)
blocksout{cnt} = {'block1', 'block2', 'block3', 'block4'}; % should be consistent for all subjects
badchannels{cnt, 1} = {'0741', '1533'}; badchannels{cnt, 2} = {'1533', '0713'}; badchannels{cnt, 3} = {''}; badchannels{cnt, 4} = {''}; % define bad MEG (not EEG) channels here (if there are any)
cnt=cnt+1;
subject{cnt} = {'meg03_0003', '234557'};
blocksin{cnt} = {'block1', 'block2', 'block3', 'block4'}; % as named during recording, in /megdata/cbu/YourSubDir/... (may differ across subjects)
blocksout{cnt} = {'block1', 'block2', 'block3', 'block4'}; % should be consistent for all subjects
badchannels{cnt, 1} = {'0741', '1533'}; badchannels{cnt, 2} = {'1533', '0713'}; badchannels{cnt, 3} = {''}; badchannels{cnt, 4} = {''}; % define bad MEG (not EEG) channels here (if there are any)
cnt=cnt+1;
%% The rest should not need editing
nr_sbj = length(subject);
try do_subjects, % if do_subjects not defined, do all subjects
catch
do_subjects = [1:nr_sbj];
end;
% Check file names and paths
checkflag = 0;
for ss = do_subjects,
nr_bls = length( blocksin{ss} );
if length(blocksin{ss}) ~= length(blocksout{ss}),
checkflag = 1;
fprintf(1, 'Different number of input and output names for subject %d (%s, %s)\n', ss, subject{ss}{1}, subject{ss}{2});
end;
for bb = 1:nr_bls,
rawpath = fullfile( rawpathstem, subject{ss}{1}, subject{ss}{2} );
rawfname = fullfile( rawpath, [blocksin{ss}{bb} '_raw.fif'] );
outpath = fullfile( pathstem, subject{ss}{1}, subject{ss}{2} );
if ~exist( outpath, 'dir' ),
success = mkdir( outpath );
if ~success,
checkflag = 1;
fprintf(1, 'Could not create directory %s\n', outpath);
end;
end;
if ~exist( rawfname, 'file' ),
checkflag = 1;
fprintf(1, '%s does not exist\n', rawfname);
end;
end;
end;
if checkflag,
fprintf(1, 'You''ve got some explaining to do.\n');
return;
end;
for ss = do_subjects,
nr_bls = length( blocksin{ss} );
for bb = 1:nr_bls,
rawpath = fullfile( rawpathstem, subject{ss}{1}, subject{ss}{2} );
rawfname = fullfile( rawpath, [blocksin{ss}{bb} '_raw.fif'] );
outpath = fullfile( pathstem, subject{ss}{1}, subject{ss}{2} );
outfname1 = fullfile( outpath, [blocksout{ss}{bb} '_raw_tmp.fif'] ); % files after bad channel check
logfname1 = fullfile( outpath, [blocksout{ss}{bb} '_raw_tmp.log'] );
outfname2 = fullfile( outpath, [blocksout{ss}{bb} '_raw_sss.fif'] ); % files after SSS+ST
logfname2 = fullfile( outpath, [blocksout{ss}{bb} '_raw_sss.log'] );
outfname3 = fullfile( outpath, [blocksout{ss}{bb} '_raw_ssst.fif'] ); % files after interpolation to first specified session
logfname3 = fullfile( outpath, [blocksout{ss}{bb} '_raw_ssst.log'] );
posfname = fullfile( outpath, [blocksout{ss}{bb} '_raw_hpi.pos'] ); % HPI info
badfname = fullfile( outpath, [blocksout{ss}{bb} '_raw_bad.txt'] ); % bad channel info
markbadfname = fullfile( outpath, [blocksout{ss}{bb} '_raw_markbad.fif'] );
fprintf(1, '\n Now processing %s with %d pre-specified bad channels.\n', rawfname, length( badchannels{ss, bb} ) );
%% (2) Convert data
skipint = '0 20';
mfcmd2=[
'/neuro/bin/util/maxfilter -f ' [rawfname] ' -o ' [outfname1],...
' -autobad 20 -skip ' [skipint] ' -v | tee ' [logfname1]
];
fprintf(1, '\n\n%s\n\n', mfcmd2);
eval([' ! ' mfcmd2])
delete( outfname1 );
%% Get bad channels
% Get bad channels from log file, store in file:
badcmd=[
'cat ' [logfname1] ' | sed -n ''/Static/p'' | cut -f 5- -d '' '' > ' [badfname]
];
fprintf(1, 'Looking for bad channels\n');
fprintf(1, '\n%s\n', badcmd);
eval([' ! ' badcmd]);
% Read bad channels in to matlab variable:
fprintf(1, '\nReading bad channel information\n');
x=dlmread([badfname],' ');
x=reshape(x,1,prod(size(x)));
x=x(x>0); % Omit zeros (padded by dlmread):
% Get frequencies (number of buffers in which chan was bad):
[frq,allbad] = hist(x,unique(x));
% Mark bad based on threshold (currently 5 buffers):
bads=allbad(frq>5);
badstxt = sprintf('%s%s%s',num2str(bads))
if sum(badstxt)>0
dlmwrite([markbadfname],badstxt,'delimiter',' ');
else
eval(['! touch ' [markbadfname] ])
end
% If extra bad channels defined, append them here
if ~isempty( badchannels{ss,bb} ),
for i=1:length(badchannels{ss,bb}),
badstxt = [badstxt ' ' badchannels{ss,bb}{i}];
end;
end;
fprintf(1, '\nThe following channels are marked as bad: %s\n\n', badstxt);
%% (3) Maxfilter incl. ST and Movecomp
% -- MAXFILTER ARGUMENTS --:
% ORIGIN and FRAME:
orgcmd=sprintf(' -frame head -origin 0 0 45');
% BAD CHANNELS:
if length(badstxt)>0
badcmd=[' -bad ', badstxt];
else
badcmd='';
end
% HPI ESTIMATION/MOVEMENT COMPENSATION:
hpistep=200;hpisubt='amp';
hpicmd=sprintf(' -hpistep %d -hpisubt %s -movecomp -hp %s',hpistep,hpisubt,posfname);
% SSS with ST:
stwin=4;
stcorr=0.980;
stcmd=sprintf(' -st %d -corr %g',stwin,stcorr);
% Downsampling
dsval = 3;
dscmd=sprintf(' -ds %d', dsval');
% -- MAXFILTER COMMAND --
if exist(outfname2),
fprintf(1, 'Deleting %s\n', outfname2);
delete( outfname2 );
end;
mfcmd3=[
' /neuro/bin/util/maxfilter -f ' [rawfname] ' -o ' [outfname2],...
' -ctc /neuro/databases/ctc/ct_sparse.fif' ' ',...
' -cal /neuro/databases/sss/sss_cal.dat' ' ',...
' -autobad off ',...
' -skip 0 20 ',...
stcmd,... % temporal SSS
dscmd,... % downsampling
badcmd,... % bad channels
orgcmd,... % head frame and origin
hpicmd,... % movement compensation
' -format short ',...
' -v | tee ' [logfname2]
];
fprintf(1, '\nMaxfiltering... (SSS+ST)\n');
fprintf(1, '\n\n%s\n\n', mfcmd3);
eval([' ! ' mfcmd3 ]);
% (4) %%%%%%%%%%%%%%%%%%%%%%%%%
% TRANSFORMATION (all but first file, block 1):
if bb>1
trcmd=sprintf(' -trans %s -frame head -origin 0 0 45',b1file);
mfcmd4=[
'/neuro/bin/util/maxfilter -f ' [outfname2] ' -o ' [outfname3],...
' -autobad off ', trcmd, ' -force -v | tee ' logfname3
];
fprintf(1, '\nMaxfiltering... -trans\n');
fprintf(1, '%s\n', mfcmd4);
eval([' ! ' mfcmd4 ])
else,
b1file = outfname2; % file used for future "trans"
copyfile( outfname2, outfname3 );
end; % if bb>1
end; % blocks
end; % subjects